基于可变滑动窗口与3σ准则的脉冲星信号去噪算法

针对地面接收射电观测脉冲星信号较弱、信噪比较低的问题,提出了基于可变滑动窗口与两层3σ准则的信号去噪算法。该算法引入可变滑动窗口,对信号进行分步连续处理,同时在筛选噪声时使用两层3σ准则算法,解决了噪声遗漏及过度去噪问题。为证明算法可靠性与实用性,利用佳木斯66 m观测站实测数据进行算法验证,针对J1939+2134与J1744—1134脉冲星的实测数据进行分析处理。结果表明,该算法能够对脉冲星数据进行有效去噪,普遍提高信噪比约10dB。     

重力仪散热装置的热仿真分析

随着移动平台重力测量精度的不断提高,对重力仪的温度控制提出了更高的要求。为了实现在不同温度环境下的高精度重力测量,本文设计了一种保温散热装置,为重力仪提供第一级温控。利用Fluent软件分别模拟了0℃,22℃和40℃环境温度下此装置内重力仪系统的温度场,并在此基础上,利用高低温箱完成该装置的温度性能实验,验证了此温控方案的可行性。     

磁轴承PWM开关功放电流实时降噪

针对传统低通滤波器在脉冲宽度调制(PWM, Pulse Width Modulation)开关功放电流降噪过程中存在去噪效果与系统带宽难以兼顾的问题,提出了一种基于提升小波变换的功放电流实时降噪法.首先基于dB4提升小波算法,采用滑动数据窗、对称边界拓展和阈值法强制降噪等相结合的方案实现对功放电流的实时降噪.然后根据不同小波分解层数对系统截止频率的影响,确定合适的小波分解层数.实验证明,提升小波实时降噪算法既可以有效地滤除功放电流噪声,又对系统带宽和相角滞后影响较小,非常适用于对实时性和信噪比都有较高要求的磁悬浮高速转子系统.      

Design of nanofluid-cooled heat sink using topology optimization

The paper presented topology optimization of 2D and 3D Nanofluid-Cooled Heat Sink (NCHS). The flow and heat transfer problem in the NCHS was treated as a single-phase nanofluid based convective heat transfer model. The temperature-dependent fluid properties were taken into account in the model due to the strong temperature-dependent features of nanofluids. An average temperature minimum problem was studied subject to the fluid area and energy dissipation constraints by using the density method. In the method, the design variable is updated according to the gradient information obtained by an adjoint based sensitivity analysis process. The effects of the energy dissipation constraint, temperature-dependent fluid properties and nanofluid characteristics on optimal configurations of NCHS were numerically investigated with following conclusions. Firstly, branched flow channels in the optimal configuration increased with the rise of the allowed energy dissipation. Secondly, temperature-dependent fluid properties were significant for obtaining the appropriate optimal results with best cooling performance. Thirdly, heat transfer performances of optimal configurations were enhanced by reducing the nanoparticle diameter or increasing the nanoparticle volume fraction. Fourthly, the optimal configuration for nanofluid had better cooling performance than that for its base fluid.     

低温推进剂火箭发动机预冷方案研究

对国内外低温推进剂火箭发动机采用的排放预冷、自然循环预冷和强制循环预冷等预冷方案进行了综述。介绍了国内新一代运载火箭使用的新型低温液体发动机的预冷研究。对液氧煤油发动机预冷方案中推进剂类型、发动机所在子级、自然循环多因素综合等影响方案的主要因素,以及发动机预冷方案中的维护、沸腾传热与两相流数值模拟等关键技术进行了分析。     

进口导流叶片对转子叶片颤振特性的影响

上游静子叶片的尾迹扰动是下游转子叶片发生强迫响应问题的主要原因,但通常认为不会对颤振特性产生影响。运用CFD技术求解非定常流场,用能量法对典型涡轮风扇NASA Rotor 67进行了气动弹性分析。结果表明:不加进口导流叶片时其叶片最有可能在第二阶模态、60°叶间振动相角的情况下发生颤振;加上IGV(进口导流叶片)后,IGV的尾迹会显著改变转子叶片的颤振特性,当转子叶片的最危险颤振模态频率接近IGV尾迹的扰动频率时,即使单独转子叶片十分稳定,但在尾迹的激励下颤振仍然可能发生;当该频率远离IGV尾迹扰动频率时,尾迹扰动同样会使转子叶片气动阻尼降低。该结果意味着尽管IGV的引入不会明显改变压气机性能,但有可能会对其颤振特性带来明显的负面影响,需要在涡轮机设计中予以考虑。     

基于小波神经网络的齿轮系统故障诊断

通过对齿轮系统在不同的运转状态下不同的故障类型进行试验测试分析,获取了有关的测试信号,对振动特征信号进行了小波阈值去噪,采用离散小波变换(DWT)对去噪后的信号进行8层分解处理,对各层的小波系数进行了小波重构,得到8层细节信号和1层近似信号,并计算了各层信号的能量,得到了信号的能量分布特征.在此基础上把各层信号特征作为神经网络的输入,进行了网络的研究、分析处理和故障分类,并对小波神经网络方法与单独采用神经网络方法的故障诊断结果进行了比较评价.研究表明,去噪处理后的效果比没有去噪的信号特征更加明显,而采用小波神经网络诊断方法,对于齿轮无故障、齿根裂纹故障、分度圆裂纹故障和齿面磨损故障能够进行很好地区分与诊断,其诊断成功率均在95%以上,可对实际工程工作的齿轮系统进行故障诊断.      

Numerical study of forced convective heat transfer around a spherical aerostat

Forced convective heat transfer is one of the major factors that dominate the thermal behaviors of aerostats. Due to the large physical size, the convection around an aerostat has high Reynolds numbers. The existing forced convective heat transfer correlations are limited to the Reynolds number lower than 10⁵, which are not appropriate for aerostat applications. Therefore, it is necessary to obtain a convective heat transfer correlation applicable to spherical aerostats at high Reynolds numbers. In this paper, steady convective heat transfer from an isothermal spherical aerostat is numerically investigated. The numerical simulation is carried out by commercial computational fluid dynamic software with the Reynolds number from 20 to 10⁸. The average Nusselt numbers are obtained and compared with those of available in literature. Based on regression and optimization with software, a new piecewise correlation of Nusselt number is proposed. The verification shows that the new correlation is reliable.     

振荡燃烧过程的同步测量方法

振动燃烧是由非稳定燃烧放热和压力脉动互相耦合产生的系统振荡过程。振荡燃烧的研究方法之一是对自激振荡燃烧相互耦合过程进行研究,得到系统的闭环特性。另外还可以对燃烧系统施加特定的扰动以得到燃烧系统的开环特性。为了研究振荡燃烧的动态过程,需要实现不同物理量的同步测量。相同步方法能够实现压力脉动与燃烧放热率脉动的同步测量,确定二者间的周期变化关系。通过对两个不同振荡类型的实验台进行相同步测量,分析振荡燃烧过程中压力脉动与放热率脉动的相位关系,并讨论了相同步方法的误差,提出了不同实现方案。这些结果将有助于我们提高火焰测量的相同步技术的准确性。